What should be considered when carrying out anti-corrosion work on pools? Feel free to add more details

Thread Content

1. Waterproofing: The floor on the first floor must be properly waterproofed； 2. Substrate preparation: Perform grinding, repair, and dust removal according to the condition of the substrate ； 3. Epoxy primer: A layer of epoxy primer with excellent penetration and adhesion properties is applied by rolling, to enhance surface adhesion. 4. Laying fiberglass cloth: Place the fiberglass cloth flat, use the prepared epoxy intermediate coat to attach it to the floor, and smooth it out with a trowel; applying it evenly helps enhance the durability of the floor. One to three layers as needed. 5. Epoxy intermediate coat: Add an appropriate amount of quartz sand to the epoxy resin, and use a trowel to apply it evenly in one to three coats. 6. Epoxy putty: Apply 2 to 3 layers as required, ensuring a smooth surface free of holes to facilitate subsequent coating application. 7. Topcoat: Apply one coat of epoxy self-leveling paint using a trowel, and apply two coats of solvent-based epoxy topcoat or anti-slip topcoat by rolling. Once completed, the entire floor will be smooth and clean