Why not get out of the water? aspen simulates condensation
Thread Content
As mentioned in the title, chilled water is used to condense humid air moisture, but no water is produced even after freezing to -10°C. Why? The method used is NRTL, and I have tried several other methods but nothing works.
Check the humidity or water content of the intake water. If the air is extremely dry, its dew point will also be extremely low ； No water coming out means it is not below the dew point.
There is no such thing as -10 degree supercooled water! It is impossible to discharge water in actual industrial cases under such working conditions. The pipe wall temperature is close to or below zero, which will only cause ice and blockage on the air side of the cooler.
There is no such thing as -10 degree supercooled water! It is impossible to discharge water in actual industrial cases under such working conditions. The pipe wall temperature is close to or below zero, which will only cause ice and blockage on the air side of the cooler.