Thread Content
How do designers set CAD graphic filling and thickening when using CAD software to create CAD construction drawings? Below is a CAD tutorial on how to use the parameter setting options and graphic scale values in Haochen Architecture CAD software to achieve automatic adjustment of graphic filling effects. Steps to set filling and thickening in building CAD software: First, open the HaoChen Building CAD software, enable the accelerated filling option in the graphic settings, located on the page \"Settings Help\" -> \"Graphic Settings\" -> \"Thickened Filling\" in the menu. As shown in the figure below: It is used for filling walls, columns, and insulation layers, offering various filling patterns and thicker line widths. There are two filling levels: “Standard” and “Detailed”. Different patterns and line weights are assigned based on the current scale, and the user can set this through the parameter “Enable detailed mode when scale is greater than 1:XX”. The mode changes when the current scale is greater than or less than the set threshold, thereby meeting the requirements for varying degrees of detail in filling and thickening across different types of drawings in construction plans. For architectural designers, the main focus is on the materials used, as well as the corresponding “standard fill patterns” and “detail fill patterns”. As shown in the figure below: Click the button in the table to set the filling type required by the designer. If the designer needs to add a new material, they can click on the triangle icon in the header of the last row to add a new material type and set the fill pattern. When applied to graphics, it can perform automatic matching. The above is a tutorial on how to set filling and bolding in the Haochen Architecture CAD software. You can refer to this CAD tutorial to solve similar problems in the future~