Thread Content
The use of the thin-wall feature in HaoChen 3D drawing software is similar to the concept of shell removal in other 3D software; it is primarily used for designing thin-walled parts and containers. Compared to other mainstream 3D software, HaoChen 3D Drawing Software offers a rich set of functions for working with thin walls, and its operation is more convenient. It can demonstrate different styles in various modeling scenarios such as rapid modeling and sequential modeling. Haocheng 3D’s thin-wall feature allows for the creation of structures both inside and outside a solid, as well as on the solid’s original surfaces. Moreover, HaoChen 3D allows thin-wall features to be configured with or without open faces. The thickness of the walls can be set uniformly or varied depending on the case. 1. Rapid modeling: HaoChen 3D’s unique rapid modeling mode reduces reliance on the attributes of model features, allowing design results to be achieved with the fewest steps possible, thereby improving design efficiency. Therefore, in fast modeling mode, using thin-wall features is also very simple and convenient; one only needs to select the surface that requires thin-wall treatment and enter the thickness to complete it. Internal and external biasing can be achieved by clicking the direction control button. (Inward bias) (Outward bias) 2. Thin walls in sequential modeling: First, switch the rapid modeling environment to sequential modeling. In this mode, it is possible to set different wall thicknesses for a part. The steps are as follows: A: Select the surface to be opened. B: Select surfaces with different thicknesses. C: Preview of the inward bias effect. D: Preview of the symmetric thin-wall effect. 3. Application of thin-wall areas: HaoChen 3D’s thin-wall feature offers a completely different user experience compared to those found in other 3D software. We can quickly set attributes such as the bias for the thick surface, open surface, and sealing surface, resulting in a more precise thinned area. Specific steps: A: First, select the surface that needs to be thinned. B: Next, select the surface that needs to have an opening created. C: The model will display the resulting effect. These are the tips for using the thin-wall feature in the HaoChen 3D drawing software. Have you learned how to use this thin-wall feature now?