Operating procedures for extraction centrifuges

Thread Content

First: Turn on the power and wait until the panel of the electrical cabinet lights up, then proceed with the centrifuge operation process. There are two ways to operate it: 1) via the control box, 2) via the touch screen. Second: Put the dry material to be extracted into the filter bag, zip it shut, place it in the drum, and cover it. Third: The liquid enters through the feed pipe, and then the time for forward rotation, reverse rotation, and the interval between these rotations are set on the touch screen. Click the start button, and the centrifuge begins to rotate. Fourth: The simultaneous extraction centrifuge is equipped with a partition sleeve, which allows coolant to enter based on the ‘bottom in, top out’ principle, thereby maintaining low-temperature extraction. Fifth: Once the extraction time is up, the dehydration time and rotation speed can be set on the display screen. Click the start button; sixth: dehydration is complete, and the extracted liquid comes out through the outlet tube. Seventh: Turn off the power