May I ask if the circulating water tank for use in the workshop can be located on the perimeter of the workshop?
Thread Content
May I ask if the circulating water tank for use in the workshop can be located on the perimeter of the workshop? The cooling tower is located on the roof of the workshop; is there any requirement regarding the distance between the circulation pool and the workshop?
Just pick one randomly. As long as it doesn’t affect other settings, that’s fine.
The circulating water tank can be placed outside the workshop; there is no requirement for a specific distance from the workshop. The main consideration is that the distance of the water pump’s suction pipe should not be too great; there should be no more than 3 bends in the suction pipe, and it’s best to do some calculations. Next, consider the ventilation and lighting of the building.
Sure, there are many similar ways.
Are cooling towers designed with this card spacing? Is that circulating pool also controlled by this card?
According to the provisions of Article 4.2.12 of the petrochemical regulations, cooling towers in circulating water systems are considered to be of Category II importance; the distance requirement is 35 meters for Category A facilities. If the project follows the regulations for fine chemicals, what should be the corresponding distance requirement?