Public Tender for PC Project of 10,000-ton-per-year Pilot Plant for Direct Conversion of Syngas from Guoneng Baotou Chemical Industry into Long-Chain A-Olefins

Thread Content

On May 27, an auction announcement was issued for the public tendering of the PC project related to the 10,000-ton-per-year pilot plant for the direct conversion of syngas into long-chain A-olefins at Guoneng Baotou Chemical. Project overview, scope of bidding, and division of bid sections (packages): This project is located in the Jiuyuan Industrial Park in Baotou City, Inner Mongolia Autonomous Region, within the premises of Guoneng Baotou Coal Chemical Co., Ltd. A pilot plant with a capacity of 10,000 tons per year for the direct conversion of syngas into long-chain α-olefins will be constructed at the site of the existing low-carbon alcohol production facility. This tender project involves the PC contracting for a 10,000-ton-scale pilot plant for the direct conversion of syngas into long-chain α-olefins. The main construction content of this project is a plant for the direct conversion of 10,000-ton-scale syngas into long-chain α-olefins, with an annual production capacity of 10,000 tons; the design flexibility ranges from 50% to 110% ； Annual operating hours: 8,000 hours. Device service life: ≥20 years. The equipment required for the project is purchased based on the detailed project design documents; at the same time, some of the existing equipment and facilities from the original low-carbon alcohol plant are refurbished for reuse. The project’s storage and transportation systems, utility systems, environmental protection measures, and accident venting systems rely on the existing facilities within the plant site, with the new plant units being constructed accordingly. Scope of the tender: This project involves a pilot-scale plant; PC contracting will be carried out using the existing detailed design documents, while retrofitting will be done based on the list of existing equipment and facilities from the low-carbon alcohol plant. Bidders should be familiar with the contents of the detailed design documents, verify the current condition of the devices to be reused, fully understand the status of those devices, and assess the volume of work required for the reuse and renovation. Completing the procurement of equipment and materials required by the design documents, notifying authorities regarding the installation and modification of pressure pipelines and pressure vessels, carrying out electrical and instrumentation modifications, constructing and installing equipment and facilities, conducting debugging, compiling and submitting handover documents, cooperating with the completion inspection, and assisting in the expert inspections for scientific research projects – in short, carrying out all tasks necessary to make the facilities ready for use. It also includes any other procurement and construction work related to the modification or demolition of equipment and facilities resulting from this project. Responsible for the procurement, transportation, loading/unloading, further handling of the equipment and materials required for the project, as well as on-site material management and project construction ； Responsible for removing construction waste and transporting it to the location designated by the client ； It supports the purging, replacement, hydrotesting, and airtightness testing during equipment commissioning and trial operation, meets the requirements for a clean start-up environment, and is responsible for the commissioning work of this project ； Provide services and support for the commissioning, startup, and performance testing of the equipment; the support is available for 1 month starting from the successful feeding of materials ； Responsible for the completion of the project, its commissioning, and all other tasks required to bring the project to completion and ready for handover and use. For detailed information, please refer to the attachment titled “Detailed Design Document for the 10,000-ton-per-year pilot plant for the direct conversion of syngas into long-chain α-olefins”. Planned completion time: The construction, installation, and commissioning of this project shall be completed within 1 year after the signing of the contract.