Bid Call for the Ruen Power Laohekou Hydrogen and Oxygen Production Technology R&D Project and the EPC General Contracting Work for the Hydrogen Production System Laboratory
Thread Content
Recently, a tender announcement was issued for China Resources Power’s Laohekou hydrogen and oxygen production technology R&D project, as well as the EPC general contracting work for the hydrogen production system laboratory. According to the tender announcement, the Huarun Power Laohekou Hydrogen and Oxygen Production Technology R&D Project is located in the Circular Industry Park area of the Chemical Industry Park in Laohekou City, Xiangyang City, Hubei Province. This tender concerns the EPC general contracting work for the hydrogen production system laboratory; it is a turnkey project. The scope of the bidding includes the survey and design of the project, the formulation and implementation of research plans for scientific studies, equipment procurement, construction, installation and commissioning, testing and inspection, defect correction, trial operation, and acceptance; all relevant special inspections and acceptances for the project (such as safety assessments, environmental impact evaluations, fire safety checks, water conservation measures, lightning protection, occupational safety and health considerations, and evaluations of the effectiveness of controls against occupational diseases); the registration, inspection, and acceptance of pressure vessels, pressure pipelines, and all other special equipment, as well as the issuance of registration certificates for their use; project supervision and inspection, handling of engineering planning and construction permits; procedures for putting the project into operation, quality warranty services, and staff training. Delivery period/construction timeline: For the project construction, work is scheduled to begin on September 30, 2025, and to be completed by September 30, 2026; the exact dates shall be subject to the written start-up notice issued by the supervisor in accordance with the requirements of the client. Technology research and development: The period begins on the date when the employer approves the research plan submitted by the contractor for the scientific research project, and the project must be completed within 2 years and pass the inspection by the relevant departments of the employer. This tender allows consortium bidders, with a maximum of 3 members.
Call for Bids for the Huarun Power Laohekou Hydrogen and Oxygen Production Technology R&D Project and the EPC General Contracting Work for the Hydrogen Production System Laboratory – Bid Announcement No. SZBGG2025080021. Huarun Shouzheng Tendering Co., Ltd., entrusted by the tenderer, is conducting an open bid process for the 34th batch of tenders in 2025 related to the Huarun Power Laohekou Hydrogen and Oxygen Production Technology R&D Project and the EPC General Contracting Work for the Hydrogen Production System Laboratory. I. Basic Information of the Project
Bidder: China Resources New Energy (Laohekou) Co., Ltd.
Bidding Agency: China Resources Shouzheng Bidding Co., Ltd.
Project Location: Circular Industry Park Area, Chemical Industry Park, Laohekou City, Xiangyang City, Hubei Province
Project Scale: /
Funding Source: Self-funded
Bid Number: S03110025GZ0002P1
Project Name: China Resources Power Laohekou Hydrogen and Oxygen Production Technology R&D Project
Section Name: EPC General Contracting for Hydrogen Production System Laboratory
Scope of the Bid: The EPC general contracting for the China Resources Power Laohekou Hydrogen and Oxygen Production Technology R&D Project is a turnkey project that includes project survey and design, formulation and implementation of scientific research plans, equipment procurement, construction, installation and commissioning, testing and inspection, defect correction, trial operation, acceptance, as well as all relevant special inspections and acceptances (such as safety assessments, environmental impact evaluations, fire safety checks, water conservation measures, lightning protection, occupational safety and health considerations, and evaluations of the effectiveness of controls against occupational diseases). It also involves the registration, inspection, and acceptance of pressure vessels, pressure pipelines, and other special equipment, as well as the issuance of certificates for their use. Additionally, it covers project supervision, handling of engineering planning and construction permits, procedures for putting the project into operation, quality warranty services, and staff training. For details, see Volume 5 for technical specifications and requirements. Key indicators: Delivery time/Project duration: For the project construction, work is scheduled to begin on September 30, 2025, and to be completed by September 30, 2026; the exact dates shall be subject to the written start-up notice issued by the supervisor in accordance with the requirements of the client. Technology research and development: The period begins on the date when the employer approves the research plan submitted by the contractor for the scientific research project, and the project must be completed within 2 years and pass the inspection by the relevant departments of the employer. Note: For detailed information, please refer to the tender documents, which shall prevail. II. Qualification and Capability Requirements for Bidders 1. Qualification requirements: (1) The bidder (or, in the case of a consortium, all members of the consortium) must be an independently registered legal entity or other organization within the People’s Republic of China, with the right to enter into contracts independently. (2) Independent bidders and consortium bidders (the members of a consortium responsible for specific tasks as stipulated in the consortium agreement must possess the appropriate qualifications for those tasks) shall have the following qualifications simultaneously: ① A Class A qualification for comprehensive engineering design, or a Class B or higher qualification in the field of chemical, petrochemical, and pharmaceutical engineering design, or a Class B or higher qualification in specialized areas such as refining engineering, storage and transportation of petroleum and chemical products, or chemical engineering ； It must also possess a special equipment design license or a special equipment production license (including GC1 level for pressure pipelines). ②It must possess a general contracting qualification for petrochemical engineering projects at level 2 or above, as well as a production license for special equipment (including GC1 level for pressure pipeline installation). 2. Performance requirements: Independent bidders must have at least one completed EPC, PC, or EP turnkey project related to an electrolytic water hydrogen production facility with a capacity of 1000 Nm³/h (per unit) or higher, as of January 1, 2020, up to the bid submission deadline (based on the date of contract signing). The consortium bidder (in accordance with the division of tasks specified in the consortium agreement) must meet one of the following combinations of ①②③, or ①③, or ②③: ① The design firm within the consortium must have completed at least one project related to the design of an electrolytic water hydrogen production system with a capacity of 1000 Nm³/h (per unit) or higher, between January 1, 2020, and the bid submission deadline (as determined by the date of contract signing). ②Construction contractor in the consortium: From January 1, 2020, to the bid submission deadline (subject to the contract signing date), it must have at least one completed project involving the construction of an electrolytic water hydrogen production facility with a hydrogen production capacity of 1000 Nm³/h (per unit) or higher. ③Equipment supplier within the consortium: From January 1, 2020, to the bid submission deadline (subject to the contract signing date), it must have at least one record of supplying an electrolytic water hydrogen production system with a hydrogen production capacity of 1000 Nm³/h (per unit) or higher (including at least the electrolyzers). Note: For the above performance records, scanned copies of the contract cover page, the pages of the contract specifying the scope of work (including installation capacity or production scale) and the deadline, the pages bearing the signatures of both parties to the contract, completion certificates or commissioning certificates, supply certificates, and a supply list that reflects the requirements related to performance, are required. Additionally, at least one progress settlement invoice corresponding to the performance contract must be provided (the invoice date must be after the contract signing date and before the publication date of the tender announcement for this bid section). 3. Requirements for the project manager: Possession of a first-level constructor registration certificate (in the field of mechanical and electrical engineering or construction engineering) along with a valid safety production assessment certificate (Category B); the certificate must be registered in the bidder’s name. The electronic version of the first-level constructor registration certificate must bear a handwritten signature by the applicant. The project manager shall not simultaneously serve as the project manager or supervisor for other construction projects. In the case of a joint bid, responsibilities shall be allocated in accordance with the agreement between the partners, and the project manager shall be appointed by the member of the consortium responsible for the construction work. 4. Safety requirements: Bidders must possess a valid safety production license. If it is a consortium bidder, the responsibilities shall be allocated in accordance with the consortium agreement, and the consortium member responsible for the construction must hold a valid safety production license. 5. Consortium bidders: Allowed, with no more than 3 members. 6. Credit requirements: Bidders must not be within the period of enforcement or under the scope of sanctions for dishonest behaviors listed on the following websites: 1) Included in the list of enterprises with serious violations and dishonesty on the **Enterprise Credit Information Publicity System website (www.gsxt.gov.cn)** ； 2) Included on the list of entities subject to disciplinary actions for dishonesty by the **Public Credit Information Center’s “Credit China” website (www.creditchina.gov.cn)** ； 3) Included on the list of dishonest defendants on the China Execution Information Disclosure Website of the Supreme People’s Court (zxgk.court.gov.cn) ； 4) Included on the website of the Ministry of Emergency Management of the People’s Republic of China (www.mem.gov.cn) on the \"blacklist\" for those subject to joint disciplinary actions for breaches in work safety regulations” ； 5) Included on the list of serious illegal and dishonest acts by the China Government Procurement Network (www.ccgp.gov.cn) ； Bidders must provide in their bid documents the search results from the aforementioned websites; these results should be in the form of electronic PDF reports generated by the websites or screenshots. 7. Patent requirements: If the equipment design incorporates patents, the bidder must possess the relevant valid patent certificates and creative patent evaluation reports, or relevant patent approvals. 8. Other requirements: Bidders must provide a test report for the 1000 Nm3/h electrolyzer issued by a third-party certification body. Notes: III. Acquisition of Tender Documents (I) Acquisition Period: August 26, 2025 – September 2, 2025 (II) Method of Obtaining Tender Documents: They can be downloaded online via China Resources Group’s Shouzheng Electronic Bidding Platform (https://www.szecp.com.cn); in-person pickup is not accepted. (III) Deadline for bidders to submit questions: September 6, 2025, at 8:00
Bidder: China Resources New Energy (Laohekou) Co., Ltd.
Bidding Agency: China Resources Shouzheng Bidding Co., Ltd.
Project Location: Circular Industry Park Area, Chemical Industry Park, Laohekou City, Xiangyang City, Hubei Province
Project Scale: /
Funding Source: Self-funded
Bid Number: S03110025GZ0002P1
Project Name: China Resources Power Laohekou Hydrogen and Oxygen Production Technology R&D Project
Section Name: EPC General Contracting for Hydrogen Production System Laboratory
Scope of the Bid: The EPC general contracting for the China Resources Power Laohekou Hydrogen and Oxygen Production Technology R&D Project is a turnkey project that includes project survey and design, formulation and implementation of scientific research plans, equipment procurement, construction, installation and commissioning, testing and inspection, defect correction, trial operation, acceptance, as well as all relevant special inspections and acceptances (such as safety assessments, environmental impact evaluations, fire safety checks, water conservation measures, lightning protection, occupational safety and health considerations, and evaluations of the effectiveness of controls against occupational diseases). It also involves the registration, inspection, and acceptance of pressure vessels, pressure pipelines, and other special equipment, as well as the issuance of certificates for their use. Additionally, it covers project supervision, handling of engineering planning and construction permits, procedures for putting the project into operation, quality warranty services, and staff training. For details, see Volume 5 for technical specifications and requirements. Key indicators: Delivery time/Project duration: For the project construction, work is scheduled to begin on September 30, 2025, and to be completed by September 30, 2026; the exact dates shall be subject to the written start-up notice issued by the supervisor in accordance with the requirements of the client. Technology research and development: The period begins on the date when the employer approves the research plan submitted by the contractor for the scientific research project, and the project must be completed within 2 years and pass the inspection by the relevant departments of the employer. Note: For detailed information, please refer to the tender documents, which shall prevail. II. Qualification and Capability Requirements for Bidders 1. Qualification requirements: (1) The bidder (or, in the case of a consortium, all members of the consortium) must be an independently registered legal entity or other organization within the People’s Republic of China, with the right to enter into contracts independently. (2) Independent bidders and consortium bidders (the members of a consortium responsible for specific tasks as stipulated in the consortium agreement must possess the appropriate qualifications for those tasks) shall have the following qualifications simultaneously: ① A Class A qualification for comprehensive engineering design, or a Class B or higher qualification in the field of chemical, petrochemical, and pharmaceutical engineering design, or a Class B or higher qualification in specialized areas such as refining engineering, storage and transportation of petroleum and chemical products, or chemical engineering ； It must also possess a special equipment design license or a special equipment production license (including GC1 level for pressure pipelines). ②It must possess a general contracting qualification for petrochemical engineering projects at level 2 or above, as well as a production license for special equipment (including GC1 level for pressure pipeline installation). 2. Performance requirements: Independent bidders must have at least one completed EPC, PC, or EP turnkey project related to an electrolytic water hydrogen production facility with a capacity of 1000 Nm³/h (per unit) or higher, as of January 1, 2020, up to the bid submission deadline (based on the date of contract signing). The consortium bidder (in accordance with the division of tasks specified in the consortium agreement) must meet one of the following combinations of ①②③, or ①③, or ②③: ① The design firm within the consortium must have completed at least one project related to the design of an electrolytic water hydrogen production system with a capacity of 1000 Nm³/h (per unit) or higher, between January 1, 2020, and the bid submission deadline (as determined by the date of contract signing). ②Construction contractor in the consortium: From January 1, 2020, to the bid submission deadline (subject to the contract signing date), it must have at least one completed project involving the construction of an electrolytic water hydrogen production facility with a hydrogen production capacity of 1000 Nm³/h (per unit) or higher. ③Equipment supplier within the consortium: From January 1, 2020, to the bid submission deadline (subject to the contract signing date), it must have at least one record of supplying an electrolytic water hydrogen production system with a hydrogen production capacity of 1000 Nm³/h (per unit) or higher (including at least the electrolyzers). Note: For the above performance records, scanned copies of the contract cover page, the pages of the contract specifying the scope of work (including installation capacity or production scale) and the deadline, the pages bearing the signatures of both parties to the contract, completion certificates or commissioning certificates, supply certificates, and a supply list that reflects the requirements related to performance, are required. Additionally, at least one progress settlement invoice corresponding to the performance contract must be provided (the invoice date must be after the contract signing date and before the publication date of the tender announcement for this bid section). 3. Requirements for the project manager: Possession of a first-level constructor registration certificate (in the field of mechanical and electrical engineering or construction engineering) along with a valid safety production assessment certificate (Category B); the certificate must be registered in the bidder’s name. The electronic version of the first-level constructor registration certificate must bear a handwritten signature by the applicant. The project manager shall not simultaneously serve as the project manager or supervisor for other construction projects. In the case of a joint bid, responsibilities shall be allocated in accordance with the agreement between the partners, and the project manager shall be appointed by the member of the consortium responsible for the construction work. 4. Safety requirements: Bidders must possess a valid safety production license. If it is a consortium bidder, the responsibilities shall be allocated in accordance with the consortium agreement, and the consortium member responsible for the construction must hold a valid safety production license. 5. Consortium bidders: Allowed, with no more than 3 members. 6. Credit requirements: Bidders must not be within the period of enforcement or under the scope of sanctions for dishonest behaviors listed on the following websites: 1) Included in the list of enterprises with serious violations and dishonesty on the **Enterprise Credit Information Publicity System website (www.gsxt.gov.cn)** ； 2) Included on the list of entities subject to disciplinary actions for dishonesty by the **Public Credit Information Center’s “Credit China” website (www.creditchina.gov.cn)** ； 3) Included on the list of dishonest defendants on the China Execution Information Disclosure Website of the Supreme People’s Court (zxgk.court.gov.cn) ； 4) Included on the website of the Ministry of Emergency Management of the People’s Republic of China (www.mem.gov.cn) on the \"blacklist\" for those subject to joint disciplinary actions for breaches in work safety regulations” ； 5) Included on the list of serious illegal and dishonest acts by the China Government Procurement Network (www.ccgp.gov.cn) ； Bidders must provide in their bid documents the search results from the aforementioned websites; these results should be in the form of electronic PDF reports generated by the websites or screenshots. 7. Patent requirements: If the equipment design incorporates patents, the bidder must possess the relevant valid patent certificates and creative patent evaluation reports, or relevant patent approvals. 8. Other requirements: Bidders must provide a test report for the 1000 Nm3/h electrolyzer issued by a third-party certification body. Notes: III. Acquisition of Tender Documents (I) Acquisition Period: August 26, 2025 – September 2, 2025 (II) Method of Obtaining Tender Documents: They can be downloaded online via China Resources Group’s Shouzheng Electronic Bidding Platform (https://www.szecp.com.cn); in-person pickup is not accepted. (III) Deadline for bidders to submit questions: September 6, 2025, at 8:00
【Ten Years of Rapid Development in Chemical Engineering Equipment】2635–2025: China’s Self-constructed Largest-tonnage, Highest-gas-storage Capacity New Offshore Floating Natural Gas Liquefaction Facilities https://bbs.hcbbs.com/thread-5699787-1-1.html (Source: Haichuan Chemical Industry Forum)
【Ten Years of Rapid Development in Chemical Processing Equipment】The world’s largest 2 million tons/year diesel adsorption separation unit was successfully commissioned between 2025 and 2635 https://bbs.hcbbs.com/thread-5699916-1-1.html (Source: Haichuan Chemical Industry Forum)
【Ten Years of Rapid Development in Chemical Processing Equipment】2641-2025: Guangxi Refining & Chemicals’ 2 million tons per year diesel adsorption separation unit was successfully commissioned for the first time https://bbs.hcbbs.com/thread-5700113-1-1.html (Source: Haichuan Chemical Industry Forum)
【Ten Years of Rapid Development in Chemical Engineering Equipment】2643-2025: China Becomes the First Country in the World to Achieve Large-Scale Thermal Recovery of Heavy Oil at Sea ** https://bbs.hcbbs.com/thread-5700272-1-1.html (Source: Haichuan Chemical Industry Forum)
【Ten Years of Rapid Development in Chemical Processing Equipment】2618-2025: Closing Domestic Technology Gaps; First domestic development of TDI railway tank containers successful https://bbs.hcbbs.com/thread-5698801-1-1.html (Source: Haichuan Chemical Industry Forum)