Regarding the breathing volume of the breather valve
Thread Content
Dear experts, I would like to ask: when calculating the amounts inhaled and exhaled, does the maximum gas volume available in the storage tank refer to the space outside the filling coefficient of the tank, or rather to the total volume of the entire device?； Additionally, regarding the volume of exhaled and inhaled air, according to the specifications, the breathing volume refers to the maximum amount of liquid that can be discharged from a tank. So, if the tank is small, is the maximum discharge volume determined by the tank’s capacity or by the designed flow rate of the pump? Thank you, experts!
It is necessary to consider various operating conditions, those for inhalation and those for exhalation, and then accumulate the values for each condition to determine the most extreme condition.
Could we add each other as friends to discuss this in detail?
Determining the breathing volume requires adding two values: 1, the maximum inflow and outflow rate of the pump; 2, the thermal breathing volume of the storage tank
The original poster can refer to the following standard: SHT 3007-2014 Design Code for Tank Areas in Petrochemical Storage and Transportation Systems; there is information on this topic
This is the oil evaporation rate from the storage tank, not the ventilation rate of the breather valve; moreover, this does not represent the latest standards.
For the ventilation volume of breather valves, it is recommended that you refer to API 2000-2014 (R2020). SH3007-2014 can also be referred to, but there are two errors in the table data related to thermal breathing in it. Appendix SH 3002 refers to the oil and gas loss from the storage tank, not the ventilation volume of the breather valve.