Have you used such a hydroscoper? Why isn’t it working? It doesn’t spray water. Not working? ?
Thread Content
Have you used such a hydroscoper? Why isn’t it working? It doesn’t spray water. Not working? ?
The newly installed one… a brand new, unused one won’t work either.
Should it be a bellows type? Is there a filter in front? Tap it during runtime to see if it works.
This post was last edited by ylb913 on 2017-1-22 at 21:01. This is a type of constant-temperature steam trap that starts to function as a steam trap only when the temperature drops to a certain level; it does not function as such when the temperature is too high. Before installing the steam trap, it is usually purged to remove the dirty condensed water, and the steam trap is installed only after steam is present. Under such conditions, with constant-temperature traps, the temperature of the steam or condensate does not drop for a long time after the trap is installed; as a result, water drainage does not occur for an extended period as well, and patience is required. There is a screwdriver slot behind the outlet; the drainage temperature should be adjustable. If that doesn’t work, you can try adjusting it.
The new is good; have you ever seen something being replaced with a new one three times in a row?