Basic Process Knowledge (True/False Questions) 20170815
Thread Content
1. The outlets of each stage of reciprocating compressors, or the outlets of positive-displacement pumps such as electric reciprocating pumps, gear pumps, and screw pumps (except those equipped with safety valves of their own)； 2. Where the equipment connected to the outlet of a blower, centrifugal compressor, centrifugal pump, or steam reciprocating pump is not capable of withstanding its maximum pressure, the outlet of the blower, centrifugal compressor, centrifugal pump, or steam reciprocating pump ； 3. Equipment in which combustible gases or liquids expand when heated, potentially exceeding the design pressure ； 4. Equipment with a maximum operating pressure at the top of 0.03~0.1 MPa should be installed in accordance with process requirements. (All correct)
1. The outlets of each stage of reciprocating compressors, or the outlets of positive-displacement pumps such as electric reciprocating pumps, gear pumps, and screw pumps (except those equipped with safety valves of their own)； (v) 2. Where the equipment connected to the outlet of a blower, centrifugal compressor, centrifugal pump, or steam reciprocating pump is not capable of withstanding its maximum pressure, the outlet of the blower, centrifugal compressor, centrifugal pump, or steam reciprocating pump ； (v) 3. Equipment in which combustible gases or liquids expand when heated, potentially exceeding the design pressure ； (v) 4. Equipment with a maximum operating pressure at the top of 0.03~0.1 MPa shall be installed in accordance with process requirements. (X)
Correct, correct, correct, correct
This post was last edited by Peng Zuosen on 2017-8-15 08:31 √√√√