In the combustion device, the burner flame is very long; how to address this? !
Thread Content
Surely, we can’t let the flames burn directly on the cylinder wall or the heat storage material. Some suggest setting up a separate combustion chamber, but this has never been seen in actual devices. How can it be solved? !
The pressure of combustion remains within a certain range; otherwise, it will have an impact.
Replace the nozzle to increase the diffusion angle, or adjust the air supply to the burner
The matching of nozzles and air volume, as well as the atomization capability and pressure of the nozzles. Consider it from these two aspects.
Okay, thank you. When burning natural gas, atomization is not required. The calorific value that requires heating is determined, as well as the natural gas flow rate.
Consider the following aspects: whether the gas pressure is too high, whether the air supply is appropriate, whether the nozzles are clogged, and whether the nozzles are overloaded
Replace burning gas with adjusted air flow, and replace liquids with spray guns