Selection of gas-liquid heat exchangers
Thread Content
Our company plans to add a stainless steel (304 will suffice) heat exchanger. The media are air and water at 7°C; the air inlet temperature is 110 degrees Celsius, while the outlet temperature is 7–12 degrees Celsius ； Seventy-degree water is used as the refrigerant ； The air pressure is around 0.85 MPa. Could the experts please explain what type of heat exchanger is used and what its heat exchange area is?
Cooling the air to 7–12 degrees using 7° cooling water seems unachievable
With a flow rate of 6,000 cubic meters per second, we are currently using an old heat exchanger; the current temperature is 18 degrees Celsius.
The heat transfer area is as follows; additional parameters are required for more details
6000 M3/H. May I ask, are you from a equipment manufacturer, a design institute, or a designer in a factory? Could you please make it convenient for me to download this software? If it’s not convenient, may I ask what other parameters you need?
You can consult the equipment manufacturers, or you can turn to design companies like ours for advice
Many such cases have been handled, especially in some domestic fermentation pharmaceutical industries. The forum provides product introductions as well as information on finned heat exchangers; the forum link is: http://bbs.hcbbs.com/forum.php?mod=viewthread&tid=163192&highlight=%D6%B5%B5%C. Due to the need for custom design, more detailed process parameters are required; contact information can be found in the signature section
I need you to provide the requirements for the material process parameters