Container installation elevation, minimum elevation
Thread Content
In the unit design of the container, if specific requirements are specified for the installation elevation, that elevation should be indicated. So when does it mean that a \"container has specific requirements regarding the installation elevation\"? ? ? It’s that when I see this container, how do I know whether it needs to have its lowest elevation marked?
For example, there are requirements regarding the height difference between the outlet of the high-level oil tank in a centrifugal compressor and the compressor axis
There is a pump below the container, and to meet the pump’s net positive suction head requirement, the container must have an appropriate installation height. There is a control valve below the container, and it is also necessary to ensure that there is no vaporization in front of the control valve; otherwise, the control valve cannot be adjusted accurately. The height of the container also has specific requirements. If a container is to transport liquid to equipment located further downstream without the use of a pump, and the pressure is insufficient, the container needs to be raised. Wait, the height of the container is determined according to your process requirements.