How to reduce the temperature of the turbid circulation return water?
Thread Content
The unit triggers an alarm when the water temperature reaches 35 degrees; the temperature of the water exiting the circulation system must not exceed 35 degrees as well. Moreover, the return water temperature from the acid cleaning unit is above 50 degrees, and a large amount of tap water needs to be added during summer. How can costs be reduced? By lowering the return water temperature?
Since there is an over-temperature alarm, it is of course necessary to find a way to reduce the temperature of the return water below the allowable level. Will the component you use to measure temperature by lowering other indicators be deceived?
Increasing the heat dissipation area and raising the return water flow rate can lower the water temperature
Money must be invested. :Lol, as someone else said, it’s impossible to fool them. However, it can be considered to use a heat pump to extract some heat and reduce the temperature. The project may not be feasible. You can always want it.