Selection of reactor nozzles
Thread Content
The high-boiling compounds generated during the distillation of silicon tetrachloride are to be treated by reacting them with air and LPG; please suggest a type of reactor nozzle
Casing: inner tube with medium, outer tube with LPG. First, vent the LPG in the outer layer; after ignition, introduce the medium, which then burns completely under the flame
You can list your process requirements, and I’ll take a look for you
These high-boiling substances include silicon tetrachloride, and they are all non-flammable, right? The principle of this reactor is the same as that used in the production of elemental silicon, right? It involves high-temperature hydrolysis to produce water vapor. But it’s not necessary, right? The content of high-boiling substances is usually very low, so simply carrying out hydrolysis to get rid of them is sufficient. If the content is high and you want to give it a try, you can refer to the nozzles used for producing fumed silica.
It’s been so long since I posted; I had forgotten........ I plan to hydrolyze it now