liquid chlorine
Thread Content
What are the methods for unloading liquid chlorine? What are the instrument interlocks for liquid chlorine storage tanks? What else should be noted regarding exhaust gas recovery? Seeking advice from experts
Nitrogen pressure, or the pump built into the vehicle; the interlock system usually includes a low-level interlock that shuts down the pump when the liquid level is too low
I’m not sure whether by \"liquid chlorine unloading\" you mean liquid chlorine tank trucks or liquid chlorine cylinders. If you are currently in the project design phase, it is recommended that you avoid designing large liquid chlorine storage tanks and instead purchase liquid chlorine cylinders directly
There are generally two loading and unloading methods: one is pumping, and the other is unloading under pressure using a vaporizer. Regarding the recovery of exhaust gases, attention must be paid to various aspects: the exhaust pipelines must not leak ； The concentration of the liquid alkali used for absorption must be appropriate ； The exhaust gas absorption system must be reliable.
I only have experience with tonnage tanks; I have no experience in unloading liquid chlorine from tank trucks, so I can’t mislead you
I would like to ask how exactly the material is unloaded using this loading and unloading method? Thank you. I need to install a liquid nitrogen tank here, and I would like to ask about the specific procedures for unloading it Thank you
It refers to chlorine in cylinder form; it is generally available in 500 kilograms and 1 ton capacities