Are the volumetric flow rates before and after the same? Why?
Thread Content
I use a air pump to control a certain gas flow rate Q1, which then enters the adsorption column for adsorption before being discharged. Is the discharge volume flow rate Q2 the same as Q1? Because gas itself is a compressible fluid, its volume is easily affected by temperature and pressure
Using a standard cube, there will be no problems in calculating based on the inlet volume
In actual operating conditions, the volumetric flow rate at the outlet should be greater than that at the inlet, right? Ignoring the effect of temperature
It’s definitely different; temperature and pressure change, while the mass flow rate remains the same :)