【Daily Question】 【AC Version for Static Equipment...Question 84】 March 25, 2019 – Revised multiple-choice questions...Everything is going well

Thread Content

bg4.png【Daily Question】【AC Version for Static Equipment...Question No. 84】 March 25, 2019. Modified multiple-choice question...Everything is going well...........................................................................The question is taken from the standard NB/T 47041-2014 \"Tower Containers\". Please point out any inaccuracies in the modifications; if you have any good suggestions, feel free to leave a reply – rewards will be given generously. ........................................................................... Answers (multiple choice, multiple choice, multiple choice) please fill in in order. Reward rules: 1 wealth for participation, 3 wealth for each correct answer, up to a maximum of 10 wealth. ...........................................................................1. The design and manufacturing entity shall be responsible for the accuracy and completeness of the design documents. （）A、Correct ； B. Incorrect ； ---------------------2. The design documents for tower-type containers shall include at least a strength calculation sheet or stress analysis report, design drawings, manufacturing specifications, and a risk assessment report (when required by relevant regulations or the client who commissioned the design); if necessary, they shall also include instructions for installation, operation, and maintenance. （）A、Correct ； B. Incorrect ； ---------------------3. In the technical documents of the design drawings, the name of the medium contained, its composition, the applicable **standards (industry standards), the toxicity of the medium and its degree of explosion hazard, as well as the corrosion margin and welding joint factors used in the design, should be specified. For tower-type vessels prone to stress corrosion, the allowable concentration of corrosive media, key process parameters, and special requirements should be indicated. （）A、Correct ； B. Incorrect ； ---------------------Answer 1: B (The design entity is responsible for the accuracy and completeness of the design documents. ) 2, A 3, A