Can the equipment port orientation diagram be represented in a top view without detailed drawings?
Thread Content
Xiaobai asks: Can the orientation diagram of the equipment outlets be shown in a top view without providing detailed drawings?
It seems different from mechanical drawings, and it’s easy to misunderstand
What I mean is to combine the front view and top view – is it possible to do this without creating a separate diagram showing the position of the pipe outlets? Is there such a practice?
The orientation of the pipe ends shall be specified in the technical requirements according to the top view.
The orientation of the pipe outlet is proposed by the piping specialist; a simple diagram showing the layout is sufficient!
From personal experience, when looking down at the icons, there is a separate table showing the pipe connections, with details such as specifications and functions listed.
It is generally not shown on the equipment diagram; the position of the pipe connections shall be determined according to the pipe connection layout diagram provided by the piping specialist
Vertical views should remain vertical, and horizontal views should remain horizontal. When in horizontal view mode, the code for each nozzle is also indicated, with detailed descriptions provided in separate sections
The pipe outlet orientation diagram mainly shows which pipe outlets there are and their installation orientations; that should be sufficient
Yes, there are many such approaches.