Can the legs be placed like in the second image?
Thread Content
Can the second drawing be used? What is the difference between the second drawing and the first one?
This post was last edited by li*nji on 2019-10-11 at 11:39 ^_^ It’s a really simple diagram; do you want the container to be placed on legs? Either way is fine. Diagram 1 offers better stability, as specified in JB4712
Is it possible to make it like 2 now? Have you come into contact with it before?
Are ear-type supports used on the tank body? It’s possible to make it like 2, with the ear-type support placed on the pillar.
Make 4 leg posts, with the support ears placed directly on them
It’s a bit like a simplified diagram of the reactor installation in chemical and pharmaceutical companies; just a guess. 2 images are acceptable.
The stress concentration at the corners of Figure 2 cannot be significantly reduced, resulting in poor stress distribution.
Figure 1: Create a frame, with the ear mounts supported on the frame beams. In Figure 2, a frame is created with the ear mounts supported on the vertical posts; actually, the crossbeams shown in Figure 2 can be omitted – a diagonal brace pulled across the vertical posts will suffice to provide stability.