Does the centrifuge have this kind of piping or does it have this kind of centrifuge?
Thread Content
After the total material is centrifuged, approximately 400 kilograms of wastewater will be produced. Can it be directly distributed to the pump in this way?
The wastewater from the centrifuge goes directly to the pump inlet. When does the pump start and stop? Does the centrifuge have a liquid storage function as a buffer tank? Mainly because I have never used a centrifuge and don’t understand it.
We configure a filtrate storage tank and set the liquid level chain start and stop of the pump, which not only avoids the no-load operation of the pump, but also facilitates observation of the centrifugal filtration effect:).
This is easy, just set the control point you need, higher than auto-start and lower than auto-stop. If the video stream has high fluctuations, it can also be self-adjusted by setting communication valves at both ends of the pump.
The liquid discharged from the centrifuge contains air and leaks material. It is usually received in the mother liquor storage tank before being distributed.
Your material enters the centrifuge and the solid material intercepts the liquid and is discharged. . . . . . . You can consider a fully automatic centrifuge chain that automatically closes the pump valve when the material is full. . . . .