The designed pressure for the water pressure is 0.6 MPa, but saturated steam with a pressure of 0.1–0.3 MPa needs to be introduced. Does this require classification as a pressure vessel?
Thread Content
The designed pressure for the water pressure is 0.6 MPa, but saturated steam with a pressure of 0.1–0.3 MPa needs to be introduced. The volume is 8 cubic meters. Can this be treated as a simple pressure vessel and thus not require any reporting?
It would be better to provide more complete parameters for the equipment; based on what you’ve mentioned, it seems to belong to the category of pressure vessels
Can it be classified as a simple pressure vessel and thus not subject to supervision?
Based on your parameters and volume, it seems unavoidable!
Are pressure vessels also divided into simple and complex ones?
When the operating conditions meet the requirements for pressure vessels, it is then a pressure vessel!
There indeed is a definition for simple pressure vessels
First of all, the old notion that simple pressure vessels don’t need to be reported can be changed; since the implementation of the \"Safety Technical Inspection Regulations for Fixed Pressure Vessels TSG 21-2016\", simple pressure vessels must also be managed in accordance with the regulations for pressure vessels. Secondly, this isn’t a simple pressure vessel either; if its volume exceeds 1 cubic meter, it is no longer a simple pressure vessel