CAD version of waste heat boiler equipment manufacturing drawings
Thread Content
The CAD version of the manufacturing drawings is intended only for communication purposes and cannot be used for commercial purposes. Thank you.
The drawing is good; thanks to the original poster for sharing it. Of course, there are also many issues, and Haiyou needs to be careful when downloading. This common flue-type waste heat boiler has a tank-like upper section for storage, and a lower furnace section for heat exchange. The version is a bit old; the standard version is still the 1998 edition, with two sets of drawings numbered 150. Many details are not specified in them, but it’s still quite good. It is very valuable for beginners to learn from. Attached is a picture of the actual product resulting from the creation of this drawing.
Thank you; let’s keep in touch more often. We used this equipment when we worked with the supplier 2 years ago.
The sharing was quite good. It’s just that these drawings are a bit old; the standards haven’t been updated in nearly a decade. The design of the structural part isn’t quite reasonable, but it doesn’t affect its functionality, so don’t worry. This type of furnace is quite simple. The original poster has also gone to a lot of trouble out of kindness.
Okay, thank you again. Let’s learn from each other*; thanks.