How to address sampling in the hydrogenation reactor?
Thread Content
As the title indicates, the pressure in the hydrogenation reactor is currently quite high, at 3–4 MpaG; sampling is required during the reaction process. I’m asking fellow sea enthusiasts if there are any suitable ways to take samples?
There are currently complete sets of online samplers available.
There are now sealed samplers available; by installing one, sampling can be done directly from the steel cylinder!
Nanjing Zhengyuan Group is equipped with an online automatic and manual sampling system for the reactor vessel, as well as an online sampling system for the pipelines. V19163339015
If interested, I can send you the product manual and a sample video for viewing. Telecom or Microcom
There is a sampling cylinder with valve ports at both ends; air is introduced on one side while the other side is used for venting. Once venting is complete, the valve is closed and the connector is removed
An automatic tank sampling system or a manual tank sampling system can be used, etc. If you are interested, please contact me
Please give me an electronic sample; I need to make a selection. Thank you
The latest models of mixers available today can reduce the pressure in the hydrogenation reactor to below 2.0 MPa, and Zhengyuan’s samplers are of good quality.
Thank you for your approval; customer recognition is our greatest support