How to set the upper and lower limits for the cell voltage in chlorine engineering cells
Thread Content
For chlorine engineering cells, the cell voltage is gradually increasing; it’s now almost 3.3V. I want to reset the voltage alarm thresholds, but I’m afraid to set them too high. Could experts please advise? What is the basis for setting the high and low alarm thresholds for cell voltage? How to set it up? How are the alarm values set for ultra-high trip shutdown? What is the basis then?
The groove pressing setting should be based on the equipment’s design standards and safe operating range. Under normal circumstances, the setting of the upper and lower limits should ensure that the electrolytic cell operates in an effective and safe manner. Generally, you can refer to the following points for setting: 1. Consult the operation manual or technical specifications provided by the device manufacturer to obtain the recommended slot pressure range. 2. Based on the analysis of past operation data regarding the trends in slot pressure, and taking into account the actual production conditions, set appropriate alarm thresholds. 3. The high-high limit and low-low limit alarms are typically set at levels that are slightly above and below the actual high and low limits, in order to avoid frequent alarms from interfering with normal operations. 4. The alarm value for ultra-high trip shutdown should be set above the highest safety threshold, to ensure that the equipment shuts down promptly in any abnormal situation and thus prevents safety accidents. Please make sure to follow the device’s safety operating procedures strictly when adjusting the settings; if necessary, consult a professional for guidance. .