How should the load conditions for a reaction tank with a stirrer, or other moving equipment, be specified?

For reaction tanks with agitators or other moving equipment, it is not sufficient to provide only the static total weight. The following load conditions need to be considered: 1. The weight of the equipment itself and the weight of the working medium, that is, the static load. 2. Dynamic loads, including forces generated during mixing, such as the impact of the mixer’s speed on the tank and vibrations. 3. Possible temperature loads: if the equipment operates under high-temperature or variable-temperature conditions, the effect of thermal expansion on the equipment’s structure must be taken into account. 4. Wind loads, seismic loads, etc., that need to be considered in specific application scenarios. The specific loading standards and specifications shall be determined in accordance with the relevant regulations of the region and industry. For example, reference can be made to ** or industry standards for pressure vessels, design specifications for mechanical equipment, etc. In China, the commonly used standard is the \"Code for Design of Pressure Vessels\" (GB150); chemical enterprises, on the other hand, need to comply with relevant standards such as the \"Code for Fire Protection Design of Chemical Enterprises\" (GB50160). When carrying out design and calculations, it is recommended to consult a professional structural engineer or use appropriate design software to ensure that all loads are handled correctly and safely. .