Is there a suitable filter for 10% aluminum chloride containing about 0.02% calcium fluoride?
Thread Content
Is there a suitable filter for 10% aluminum chloride containing about 0.02% calcium fluoride? It is necessary to filter out all the calcium fluoride, so that a sludge cake can be formed
A filter press or a vacuum filter can be used to treat aluminum chloride solutions containing calcium fluoride; these filtration devices can effectively remove calcium fluoride and form it into a sludge cake. It is recommended to choose equipment with good filtration performance and cake drying capabilities, to ensure that calcium fluoride can be completely filtered and the desired treatment results are achieved. At the same time, the selection of filtering materials must also be considered to ensure that they can withstand chemical erosion and provide effective separation. .
Many filters are suitable; filtering depends on the operating conditions – what is the size of the particles?
Any ultrafiltration membrane will do; one with a pore size of 0.2 microns is sufficient.
What is the size of calcium fluoride particles? The specific operating conditions are not provided, making it difficult to make a choice
Make polyaluminum chloride; there is a step involving filtration.
You can leave your contact information, and I’ll send you the manufacturing company. We have researched phosphate filtration.
Look at my signature below; there are contact details there