Are there now 110E series EJA transmitters?
Thread Content
I would like to know if there is an 110E series for EJA pressure transmitters nowadays? I would like to purchase a few units, with ranges roughly as follows: 0-500Pa, -10-0KPa, 0-20KPa, and 0-1MPa. Could you please provide me with the specific model numbers?
Do you still need a pressure transmitter, or one for differential pressure?
If it’s due to pressure, you can’t use 110E for this; for the first three cases, 310E is recommended, and 430E should be used for pressures ranging from 0-1 MPA. Please inform the manufacturer of these details so that they can help confirm the appropriate option
Please tell me about your process conditions – what is the medium (gas, liquid, slurry?) ), the maximum temperature; I’ll help you choose it and then you can confirm with the manufacturer
Is there a data table? Ranges alone are not enough for selection. Data on medium parameters, process connections, etc. is required; it would be ideal to have a data sheet
EJA110E is a differential transmitter. The pressure transmitters are EJA310E, 430E, 510E, 530E
Those ranging from 0-500 Pa, -10-0 KPa, and 0-20 KPa are used to measure gas pressure; the temperature seems to be low, around a few dozen degrees. Those ranging from 0-1 MPa are used to measure water pressure.
For ranges of 0-500 Pa, the EJA310E-JLS14G model can be used with any installation option; for ranges of -10-0 KPa and 0-20 KPa, either the EJA310E-JMS14G model or the EJA430E-JHS14G model can be used. For ranges of 0-1 MPa, the EJA430E-JAS14G model is suitable.