Practical steps for setting up an instrument data recorder

Thread Content

The last edit to this post was made by zjdzfjc on 2017-3-9 at 09:28. Settings for current alarms related to the exhaust fan’s frequency converter: The control panel is as shown in the figure below. The settings for current alarms of the frequency-driven motor are as follows: 1. On the monitoring screen, press the button marked “Book” to enter the “Function Query” screen. 2. Select configuration settings; press the EN button twice to enter the configuration mode, then select “Alarm Configuration””； Press EN to enter the “Alarm Configuration” screen. 3. On the “Alarm Configuration” screen, select Channel 1 by default, choose the alarm limit, and then set the current alarm value. After making the settings, press EN to save them. 4. Press the corresponding button to exit; if parameters are modified, a prompt will appear asking whether to save them. Select“Yes” and press EN to return to the “Configuration Screen”. 5. Press the corresponding button to exit, then press EN to return to the “Function Query” screen, and finally press the corresponding button to return to the monitoring screen