Issues with the seamless commissioning of the split-path function blocks in CS30000
Thread Content
For the functional blocks involved in this cross-path operation, as shown in the figure below, how can the upstream module TIC-3203 automatically track the MV values of the downstream modules TV-3203A/B when in IMAN mode? This will prevent TV-3203A/B from resetting to MV values of 80/20 simply because the upstream TIC-3203 has an MV value of 20
A CALCU block can be created to have its execution order placed before these blocks. Then, the MV value of TV-3203A/B is used to estimate the MV value of TIC-3203
With the write operation block, isn’t there any other simpler way to set it up?
The last edit to this post was made by jlshnlhj on 2017-5-22 at 09:13. The key to solving this problem is to keep the TIC-3203SP in CAS mode, and not have the TV-3203A/B in manual mode. Otherwise, the possible values of the mv for TV-3203A/B could leave TIC3203-SP at a loss and unable to track, and consequently, the mv of TIC3203 would also be unable to be tracked.
The reason for the IMAN state is that the two lower modules are in manual mode