Liquid level
Thread Content
What is the difference between a hydrostatic level gauge and a single-flange type? Can a single-flange device be used to measure the liquid level in a sealed container?
The single-flange type is a type of static pressure gauge; it cannot be used to measure the liquid level in sealed containers, that is, containers under pressure
A hydrostatic level gauge is what we commonly refer to as a submersible level gauge; it’s not very reliable, as it needs to be placed directly into the water tank. A single-flange level gauge is installed by making an opening at the lowest point on the side of the tank, and when measuring the level in a sealed container, the other end is connected to the gas phase of the tank using a pressure transfer tube. However, for sealed containers, a double-flange level gauge is recommended!
A hydrostatic level gauge is what we commonly refer to as a submersible level gauge; it’s not very reliable, as it needs to be placed directly into the water tank. A single-flange level gauge is installed by making an opening at the lowest point on the side of the tank, and when measuring the level in a sealed container, the other end is connected to the gas phase of the tank using a pressure transfer tube. However, for sealed containers, a double-flange level gauge is recommended!
Flange-type level gauges are commonly used for measuring media that are prone to crystallization, viscous, or corrosive. Of course, single-flange level measurement also falls under the category of hydrostatic methods; for sealed containers, double flanges or differential-pressure single flanges are used, with a pressure tapping tube at the top to enable negative-pressure measurement.
Single-flange types cannot measure the level in sealed, pressurized tanks; they can only be used to measure the level in tanks at atmospheric pressure. Hydrostatic level gauges include single-flange level gauges; measuring the level under pressure requires double-flange gauges
Theoretically, there is no difference between a static pressure level gauge and a single-flange level gauge. Single-flange level gauges cannot measure the level in sealed containers.
The single-flange type is a type of static pressure gauge; it cannot be used to measure the liquid level in sealed containers, that is, containers under pressure. The liquid level is calculated using the formula Ρgh (density * gravitational acceleration * height), where Ρ*g represents the pressure generated by the liquid. If additional pressures are applied at this time, it will affect the measurement results; therefore, it is not possible to measure under pressure.
Hydrostatic level gauges and those with a single flange cannot measure the level in sealed tanks that are under pressure; they can only be used to measure the level in tanks at atmospheric pressure. It is differential pressure transmitters with two flanges that can be used to measure the level in sealed tanks under pressure! !