Installation of radar level gauge
Thread Content
I would like to ask the experts in instrumentation for guidance on assembling radar level gauges. . Guided wave radar. Are there any missing parts?
Did you fail to upload the picture? . .
It might not have been refreshed just now; there should also be a pin screw used to secure the connection between the cable and the gauge. I’m not sure if you missed taking a photo of that
Mine is a guided wave tube; the thick part is probably the weight for another cable-type radar level gauge in the box. However, I can’t screw the internal threads of my guided wave tube onto the connector with external threads on the flange.
You can refer to the instructions
These are 2 guided-wave radar level gauges, 1 cable-type and 1 rod-type; the rod-type one needs to be assembled.
I mean how to install the waveguide. . . It seems that the waveguide rod can’t be screwed onto the gauge flange.
If it can’t be screwed on, how can it be assembled? Ask the manufacturer whether there was a shipping error.
I’m not sure if it’s a model that can be disassembled; let’s check if there’s still a bag with screws inside the box.