How to choose a field level gauge for sodium hypochlorite aqueous solutions
Thread Content
For the level gauge used in sodium hypochlorite aqueous solutions, what material should it be made of? Should PP or PE be chosen? Are there any other options? Magnetic flap level gauge
A magnetic flap level gauge will do; it’s cost-effective
If there’s no pressure! You can choose a plastic or glass tube!
Magnetic flap level gauge with lining 4F – costs one or two thousand yuan
1. Sodium hypochlorite – why is it necessary to use PTFE lining? ............... Just messing around randomly. 2. Logically speaking, when testing sodium hypochlorite solutions, 316L material is the right choice. But considering that the diaphragm is very thin, at 0.02 mm, it’s better to be extra cautious; using a sensor diaphragm that does not come into contact with the liquid for measuring pressure and level ensures reliability, with no need for repair or maintenance over 8 or 10 years. 3. Open containers with gaps – use a submersible level gauge. 4. Sealed containers under pressure – use a differential level gauge
…………As shown on site, those using tetrafluoro transparent tubes with movable flanges at both ends are suitable – simple and practical for corrosion protection…………
What does “on-site” mean? You supply power on-site; it’s displayed right there at the location, right? You don’t go to a remote location to collect signals, right? .