High-concentration sulfuric acid laboratory analyzer

It is recommended to use an online ultrasonic concentration analyzer, a product originally imported from Germany. Contact number: 15011348038, Liu (same number on WeChat)

It is recommended to use an online ultrasonic concentration analyzer, a product originally imported from Germany. Contact number: 15011348038, Liu (same number on WeChat)

The accuracy is within ±0.2%, though this varies depending on the manufacturing process; under optimal conditions, an accuracy of one in a thousand or even one in ten thousand can be achieved. Liu: 15011348038 (same as WeChat)

It’s all nonsense anyway; the process of serving dishes in the image is also nonsense............ SC606 – Portable and desktop dual-use flash slurry density analyzer (intrinsically safe, explosion-proof). 1. Ease of use: A. Can be used either portably or on a desk; it takes 1 minute to set up the device after unboxing, and 1 minute to pack it up again. No tools such as wrenches are required for installation. B. No need to level the base for measurements; even when the device is placed on a steep slope, high-precision measurements can still be obtained. 2. Operation: Push and pull the limit switch, place the probe in the liquid to be measured, press a button, and one sample analysis can be completed within 5 seconds. 3. Principle: Hydrostatic method. 4. Resolution of measurement values: 0.001 grams/cubic centimeter. 5. Reproducibility of measurements: ≤±0.001 grams/cubic centimeter； 6. Measurement accuracy: The total measurement error, taking all influencing factors into account, is ≤±0.003 grams per cubic centimeter.
7. Range: 0–6 grams per cubic centimeter, 1–20 grams per cubic centimeter.
8. Calibration: Calibration can be carried out using distilled water or commercially available pure water on-site; this ensures that the instrument maintains its factory-set precision and only takes 5 seconds.
9. Media: Solutions, emulsions, two-phase or three-phase suspensions, including sludge and cement mortar; the temperature of the fluid can range from -40 to 110°C.
10. Probe and maintenance: The probe is designed to prevent sticking and contamination; after measurement, it can be rinsed with clean water in a beaker or gently brushed.
11. Safety: Intrinsic safety design, E*aⅡCT6 rating, allowing use in environments with explosive gases.
12. Protection level: IP65, suitable for use in all weather conditions.
13. Power supply: 2 AA batteries; external 12VDC power supply is also available as an option.
14. Communication: RS232 data communication interface is available as an option; computer testing software is provided free of charge, along with programming examples.
15. Weight: 3.6 kg

I’m sorry, but there are no suitable products available at the moment. You already have products from other brands available online, right? Does it work on the principle of ultrasound or refraction?

There is no performance data regarding the measurement of sulfuric acid. It is a filler product that deviates from our main business. It was developed, but no promotion was carried out and not many units were sold. ........ . . .

In terms of physical properties, concentrated sulfuric acid is easier to measure, while dilute sulfuric acid is much more difficult. .

Shifang Jiekong Electromechanical http://www.dyjkjd.com/index.html CL100 series conductivity and pH meters, with a flow-through design and DN25 flange connections. The measuring element does not come into direct contact with the medium being measured, and there is no polarization effect; it is particularly suitable for measuring the concentration of highly corrosive media such as strong acids, strong bases, and salts. These instruments are widely used in power plants, the chemical industry, metallurgy, pharmaceuticals, food processing, and environmental protection sectors for continuous online monitoring of acid, alkali, and salt concentrations or conductivity, as well as in CIP processes for the food and beverage industry. I. Main Technical Specifications 1. Measurement Range a) Concentration Measured Media Hydrochloric acid Sulfuric acid Nitric acid Sodium hydroxide Saltwater Concentration range (%) 0～5 0～10 25～40 0～5 0～25 35～80 94～99.5 0～25 35～50 0～5 0～10 25～40 0～4 27～30 Note: The above media are not the only ones; for other media, separate charges will apply for the generation of conductivity curves. b) Conductivity: 0～50(mS/cm) ； 0～200(mS/cm) ； 0～500 ； 0～1000(mS/cm) ； 　　c) Temperature: 0～150℃ ； 　　Instrument accuracy: Class 1.0 ； 　　Temperature compensation range: 0～150℃ ； 　　Temperature coefficient compensation range: 30 steps (0～9.99)%/℃ (adjustable) ； Concentration linearization: 30 segments ； 　　Maximum operating temperature of the measurement probe: 150℃ ； 　　Maximum operating pressure of the measuring probe: 10 MPa ； 　　The measurement probe is made of polymer materials with excellent corrosion resistance, making it suitable for all acids, bases, and salts ；