Technical advantages of mass flow meter products

Thread Content

　1. Proprietary traffic data model algorithm； Fuzzy theory algorithm for controlling temperature and humidity ； 　　2. High-performance intelligent microprocessors and analog-to-digital, digital-to-analog conversion chips ； 　　3. Wide range ratio of 1000:1 ； Large diameter, low flow rate, negligible pressure loss ； 　　4. Direct measurement of mass flow rate, without the need for temperature and pressure compensation ； 　　5. Low-flow measurement is highly sensitive ； 　　6. Easy to design and select, simple to install and use ； 　　7. Suitable for measuring the flow rate of various single or mixed gases. 　　Product features of mass flow meters:
1. Uses a patented platinum RTD sensor with extremely high stability.
2. Features a proprietary “balanced structure packaging” for automatic compensation of medium temperature.
3. Proprietary algorithms ensure high linearity, high repeatability, and high precision.
4. Wide measurement range of 1000:1, which can be expanded upon customer request.
5. Capable of measuring low flows in large-diameter pipes; minimum detectable flow is as low as zero, with a resolution of 0.001 m/s.
6. No moving parts, so vibration effects are negligible.
7. Low requirements for straight pipe sections—only 1–2D is needed.
8. Independent of the temperature and pressure of the medium.
9. Proprietary high-temperature algorithm allows operation at medium temperatures up to +510°C.
10. High-humidity handling algorithm ensures accurate measurements.
11. 12-point dynamic correction for the flow signal, along with 10 built-in correction points.
12. Online dynamic calibration of current/voltage output.
13. Not sensitive to small particles such as dust.
14. Easy maintenance due to the possibility of installation and removal without interrupting flow online.

Applications of mass flow meters:
1. Utility industries—monitoring in electricity, gas, and water treatment processes.
Gases in pipelines ； General system ； biogas ； gas ； Natural gas ； Liquefied gas ； Boiler air preheating 　　2. Oil and gas industry 　　Energy exchange ； Wellhead gas recovery ； Gas metering ； Gas mass analysis ； Leak gas test ； Natural gas measurement ； Monitoring of flare gas 　　3. Power industry 　　Gas measurement during the gas distribution process in fuel systems ； Measurement of various gases in boilers and auxiliary systems ； Gas measurement in gas stoves ； 　　Hydrogen measurement ； Measurement of primary and secondary air in power plant blast furnaces 4. Chemical industry Flue gas circulation monitoring ； Gas flow measurement in sampling systems ； Gas flow measurement for the exhaust fan ； Ammonia gas measurement in fertilizer plants ； Battery factories 　　Measurement of various gas flows 　　5. Metallurgical industry 　　Gas flow measurement in steel mills ； Measurement of blast furnace gas in ironmaking plants ； Measurement of coke oven gas in coking plants ； Measurement and control of gas (blast furnace gas, coking gas, natural gas, etc.) in rolling mill heating furnaces ； Control of gases such as hydrogen, oxygen, and nitrogen in heat treatment quenching furnaces, etc. 6. Pulp and paper industry Measurement of gases in wastewater treatment systems ； Flue gas flow monitoring ； Boiler recovers secondary/tertiary air ； Measurement of gas and air supply to boilers 　7. Food and pharmaceutical industries 　Introduction of fresh air during processing operations ； Carbon dioxide treatment in breweries ； The flow rate of hot air in the bottle sterilizer ； Thermal oxidation process Gas flow rate measurement ； Ventilation system ； Boiler intake air, exhaust gas, process control 8. Environmental protection Gas measurement during biogas utilization ； Chlorine gas measurement during chlorine treatment ； Gas measurement in aeration tanks during wastewater treatment ； 　　Monitoring of SO2 and NOX emissions from chimney flues 9. Other industries Measurement of compressed air in factories ； Control of powder/gas ratio in the coal powder combustion process for fuel purposes ； Control of hot gas flow emission from vertical grinding mills in the cement industry