YT1000 locator
Thread Content
I would like to ask: when the DA is in active mode, to which points on the cylinder are out1 and out2 connected respectively? If A is the left side of the cylinder and B is its right side
This post was last edited by tiger2010 on 2021-1-20 at 21:09. I don’t understand the phrase “A is on the left side of the cylinder and B is on the right side”； Actual single-acting/double-acting cylinders generally do not have the air intake structure described in this manual
What I want to ask is: how does a double-acting valve positioner connect to a cylinder? Doesn’t the valve positioner have two air outlets, out1 and out2? In the case of positive-action DA…
This is the connection method for our pneumatic valves; please check which side of your cylinder is open and which side is closed.
By looking at your diagrams, it seems that when in the positive action mode, OUT1 is connected to the cylinder on the upward side and OUT2 is connected to the cylinder on the downward side. There are four diagrams in total: 1 and 2 represent the single-acting mode with a spring, while 3 and 4 represent the double-acting mode.
Is this an O-ring valve or a V-ring valve?
Both Type O and Type V can be chosen.