Circulating water flow meter
Thread Content
I would like to ask: For process pipelines with a DN500 diameter, operating at a pressure of around 0.3 MPa and a temperature below 40°C, where steam condensate is used as circulating water (with a very low conductivity), which type of flow meter made in China would be suitable? Thank you
Ultrasonic flowmeters – we are the manufacturer and have experience in this area; I can send you some information. Contact number: 15890954071 (same number on WeChat)
An electromagnetic flowmeter will do; currently, Wiltai in China produces decent ones.
Standard throttling elements or Orifice plates are both acceptable; during installation, care should be taken to prevent freezing and condensation
A liquid turbine flow meter will do; electromagnetic types cannot be used since they don’t conduct electricity, and ultrasonic flow meters are expensive. We can discuss the details; you can add me on WeChat at 17331812577
Insertion-type vortex street, insertion-type V-cone, standard orifice plate
A balanced flow meter will do. For applications where the range ratio requirement is not high, a standard orifice plate can be used.
Considering costs and maintenance, ultrasound