Thread Content
Overview: A high-precision constant temperature bath. After the desired medium is placed in the bath, the device is turned on by setting the temperature using a temperature controller; heating elements are then used to raise the temperature of the medium until it reaches the value set by the controller； During this process, the circulation water pump keeps rotating through its impeller; liquid continuously flows in from the inlet pipe, passes through the pump body, and then is discharged from the pump’s outlet. This mechanism helps maintain a constant temperature. The equipment can also operate in a constant temperature environment. Through the external circulation interface, the medium with a constant temperature can be supplied to devices that require such control, thereby enabling temperature regulation for those devices. Product features: 1. A thermostat equipped with advanced temperature control technology ensures a temperature control accuracy of up to 0.005℃ for the bathtub. 2. The body of the constant-temperature chamber is specially designed to maximize its usable area and minimize temperature fluctuations, thereby ensuring stability in temperature. The uniformity of the temperature field is ±0.005℃, and a unique bottom jet technology helps maintain uniform temperature. 3. It uses a compression refrigeration system, which ensures sufficient cooling capacity to rapidly reduce temperature and maintain it stable even when the ambient temperature is high. 4. The tank body is designed with stainless steel to maximize its overall service life. 5. Safety low water level alarm: automatically shuts off the heating source to prevent dry burning. 6. The pipe joints use quick-connect connections. Working principle: 1. The constant-temperature chamber is equipped with a temperature probe to monitor the temperature in real time. 2. Temperature-controlled mixing is achieved using a separate water pump to facilitate internal and external circulation of water for stirring. The constant-temperature chamber is equipped with temperature probes that transmit the temperature data to a controller, which uses PID control to regulate heating and cooling in order to maintain a constant temperature. 3. The bathtub is 20 cm deep, and the opening can be equipped with a custom calibration device. Usage precautions: The most common problem with bathtubs is the inability to maintain a constant temperature, which is often caused by improper placement and insufficient daily maintenance. Please pay attention to the following points regarding the setup of the system and its maintenance during use: 1. This product should be placed in a location with a temperature below 35°C and good ventilation. 2. Do not place obstacles in the ventilation openings of this product. 3. If wind blows against the pipes, it will reduce the cooling efficiency; try to keep the pipes as short as possible, but avoid bending them. 4. Please be aware of dust in the environment, and clean the dust from the air inlets promptly.