How is the diaphragm inserted into a diaphragm pressure gauge?
Thread Content
How is the diaphragm inserted into a diaphragm pressure gauge?
The diaphragm of a diaphragm pressure gauge is usually installed during the manufacturing process, with the specific steps depending to some extent on the design and structure of the pressure gauge. Typically, a diaphragm is placed between the measuring element of the pressure gauge and the pressure interface, serving to isolate the medium from the measuring mechanism and thus protecting it from being corroded by the medium under measurement. The general steps may include placing the diaphragm in the predetermined position, and then securing it in place through mechanical assembly or welding. The shape and size of the diaphragm must be customized according to the design of the pressure gauge. .
You didn’t understand this diagram properly; the diaphragm is on the outer surface, so there’s no such thing as it going \"inside\"
The diaphragm is on the outer surface of the central hole in the flange. There’s no need to “go in””
It seems to be asking about how to fill the isolation fluid inside
Can’t you research something useful?
Obviously, the poster wants to repair the broken diaphragm pressure gauge by themselves.