Issues with Advanced Process Control APC in the UNIPOL process
Thread Content
After APCshutdown, it fails to start when tried to restart it again. Is there anyone who can help solve this issue?
Possible solutions: 1. Check whether the hardware interfaces are working properly, including cables and ports. 2. Check for any error logs or reports. This helps to understand where the specific problem lies. 3. Restart the system: A full restart of the system may help resolve temporary technical issues. 4. Upgrade or update the system: If the problem is caused by an outdated version, it may be necessary to upgrade or update the system. 5. Consult technical support: If none of the above attempts resolve the issue, the best course of action is to contact the relevant technical support. At the same time, it is best to have a detailed description of the specific issue, which **improves the efficiency of solving it**. The above are all general suggestions; the specific situation needs to be considered in light of actual conditions. .
I’ve tried everything except reinstalling and updating the software, but it didn’t work. Moreover, this thing is made by Americans, and their response time is extremely slow
This post was last edited by jlshnlhj on 2023-9-19 07:25. The Unipol Platform Automation and Syrinx.Service services are not running; try to see if they can be started manually Is clicking “Start” below ineffective?