One Question per Day (March 4, 2018)

2018-03-04View Original

Thread Content

In the technical specifications for raw coal used in dry coal powder fluidized bed gasification, total sulfur is divided into three grades; what are the respective concentration ranges? Similar to the technical requirements for coal used in water-coal slurry gasification, Grade I is ≤1.00%, Grade II is >1.00~2.00%, and Grade III is >2.00~3.00%

Reply #22018-03-04

Answer: Similar to the technical requirements for coal used in water-coal slurry gasification, Grade I is ≤1.00%, Grade II is >1.00~2.00%, and Grade III is >2.00~3.00%

Reply #32018-03-04

The last edit to this post was made by yangshaoj2005 on 2018-3-4 at 16:54. In the technical specifications for the raw coal used in dry coal powder fluidized bed gasification, total sulfur content is divided into three categories; what are the respective concentration ranges? Level 1: Less than or equal to 1% Level 2: Greater than 1% and less than or equal to 2% Level 3: Greater than 2% and less than 3%

Reply #42018-03-04

Similar to the technical requirements for coal used in water-coal slurry gasification, Grade I is ≤1.00%, and Grade II is >1.00~2.00%

Reply #52018-03-04