Just starting out with the gasification furnace process – seeking guidance on approaches and methods
Thread Content
bg2.png I’m just starting out with the gasification furnace process; seeking ideas and methods! !
This post was last edited by kyr on 2018-8-24 08:39. First and foremost, remember that when learning*, one should not try to cut corners; the best approach is to combine theory with practice. The most straightforward way is to observe more, ask more questions, and think more. The most effective method is to understand the media, composition, and flow rates of all the pipelines at the vaporization site, and to integrate this knowledge with PID controls and operating procedures. One should also know the structure and principles of the equipment and be able to operate it skillfully
There are too many PIDs; I forgot about them after looking at this. Sometimes, people only see the surface
Come in and see if there are any experts who can explain it
Then study hard and memorize it; ask yourself to draw a diagram from memory once a week
Read books, and then go to the site every day to check its operational status.
Could the seniors share any notes or materials on this topic?
The operating procedures are the best guidebook; by understanding them thoroughly, you will at least be able to carry out the operations without any problems, and then you can delve deeper into the subject
Seeing it a thousand times is not as good as doing it once with your own hands; just put in the effort and work hard. You can also go to forums to exchange ideas and learn from others’ experiences