Wet slagging process for crude benzene
Thread Content
How to solve the problem of clogging in the wet slagging process using crude benzene?
It’s probably due to improper operation; reduce the time by relying on waste time. Increase the awareness of operators
The design was inadequately considered, and the operation was improper.
Please clearly specify whether it is a liquid-phase or gas-phase blockage. If it is a liquid-phase blockage, it is likely caused by improper slag discharge temperature or inadequate process handling before and after slag discharge. If it is a gas-phase pipeline blockage, it is due to excessively high slag discharge temperatures, which vaporize components in the solid phase into the gas phase. Please pay attention to the operating temperature, and it is also necessary to verify whether the pipeline design is appropriate.