Practical Exercise on Purification Technology Version [035]
Thread Content
How can one tell if the pump’s cooling water pipeline is blocked? How to handle it? Answer: 1. The temperature of the pump bearings rises; 2. The flow rate of the cooling water decreases or even stops. Solution: Clear the blockage. If it cannot be cleared in a short time, start the backup pump and stop the affected pump to carry out the clearance. Coal Chemicals Sector – Purification Technology Edition, 2017: “My Technical Upgrades” in the coal chemicals industry (large rewards available). http://bbs.hcbbs.com/thread-1786290-1-1.html Registration for chemical engineers – Experience-sharing event titled “Learning from Others’ Experiences”. http://bbs.hcbbs.com/thread-1808158-1-1.html
The pump bearing temperature rises, with low or even no cooling water flow； Clear the blockage; if it cannot be cleared in a short time, reverse the pump and hand over the situation to maintenance for handling.
The pump bearing temperature rises, with low or even no cooling water flow； Clear the blockage; if it cannot be cleared in a short time, reverse the pump and hand over the situation to maintenance for handling.
The temperature of the pump bearings rises, and the flow rate of cooling water is low or even non-existent; clean it out. If cleaning it cannot be done within a short time, reverse the pump and hand it over for repair.
This post was last edited by wangld on 2017-8-14 at 13:30: 1. The temperature of the pump bearings increases; 2. The flow rate of the cooling water decreases or even stops altogether. Treatment: Clear the blockage; if it cannot be cleared in a short time, start the backup pump and shut down the main pump to clear the blockage.
The temperature of the pump bearings rises, and the flow rate of cooling water is low or even non-existent; clean it out. If cleaning it cannot be done within a short time, reverse the pump’s operation and hand it over for repair
The pump bearing temperature rises, with low or even no cooling water flow； Clear the blockage; if it cannot be cleared in a short time, reverse the pump and hand over the situation to maintenance for handling.
Answer: The temperature of the pump bearings rises, and the flow rate of cooling water is low or even non-existent; clean it out. If cleaning it cannot be done within a short time, reverse the pump’s operation and hand it over for repair.
The pump bearing temperature rises, with low or even no cooling water flow； Solution: If it cannot be cleared in a short time, reverse the pump and hand it over for maintenance.
The pump bearing temperature rises, with low or even no cooling water flow； Clear the blockage; if it cannot be cleared in a short time, reverse the pump and hand over the situation to maintenance for handling.
The pump bearing temperature rises, with low or even no cooling water flow； Clear the blockage; if it cannot be cleared in a short time, reverse the pump and hand over the situation to maintenance for handling.