Methanol Purification Version – Daily Question 20200422
Thread Content
How is the temperature increased in the synthesis tower? Answer: (1) Use a desalinated water pipeline to supply desalinated water to the drum, maintaining the liquid level at 30%. (2) Start the syngas compressor to establish a nitrogen cycle. (3) Open the steam nozzle of the steam ejector and inject steam, with a heating rate of 25°C/h.
(1) Desalinated water is supplied to the drum through a desalinated water pipeline, with the liquid level maintained at 30%. (2) Start the syngas compressor to establish a nitrogen cycle. (3) Open the steam nozzle and inject steam, with a heating rate of 25°C/h.
(1) Desalinated water is supplied to the drum via a desalinated water pipeline, with the liquid level maintained at 30%； (2) Start the syngas compressor to establish a nitrogen cycle ； (3) Open the steam nozzle and inject steam, with a heating rate of 25°C/h.
(1) Desalinated water is supplied to the drum via a desalinated water pipeline, with the liquid level maintained at 30%； (2) Start the syngas compressor to establish a nitrogen cycle ； (3) Open the steam nozzle and inject steam, with a heating rate of 25°C/h.
(1) Desalinated water is supplied to the drum via a desalinated water pipeline, with the liquid level maintained at 30%； (2) Start the syngas compressor to establish a nitrogen cycle ； (3) Open the steam nozzle and inject steam, with a heating rate of 25°C/h.
(1) Desalinated water is supplied to the drum via a desalinated water pipeline, with the liquid level maintained at 30%； (2) Start the syngas compressor to establish a nitrogen cycle ； (3) Open the steam nozzle and inject steam, with a heating rate of 25°C/h.
(1) Desalinated water is supplied to the drum via a desalinated water pipeline, with the liquid level maintained at 30%； (2) Start the syngas compressor to establish a nitrogen cycle ； (3) Open the steam nozzle and inject steam, with a heating rate of 25°C/h.
(1) Desalinated water is supplied to the drum through a desalinated water pipeline, with the liquid level maintained at 30%. (2) Start the syngas compressor to establish a nitrogen cycle. (3) Open the steam nozzle and inject steam, with a heating rate of 25°C/h.
(1) Desalinated water is supplied to the drum through a desalinated water pipeline, with the liquid level maintained at 30%. (2) Start the syngas compressor to establish a nitrogen cycle. (3) Open the steam nozzle and inject steam; the temperature rise rate is 25°C/h
(1) Desalinated water is supplied to the drum through a desalinated water pipeline, with the liquid level maintained at 30%. (2) Start the syngas compressor to establish a nitrogen cycle. (3) Open the steam nozzle and inject steam, with a heating rate of 25°C/h.