Electrical Technology 2020-5-10
Thread Content
This post was last edited by sdscj0122 on 2020-5-10 07:39. Electrical – True or False questions based on the \"Power Safety Work Procedures\". Please indicate whether the answer is correct or incorrect; 3 points for a correct answer, 2 points for an incorrect one. A detailed explanation of the reason is worth 5 points. When the company authorizes personnel designated to inspect high-voltage electrical equipment to carry out such inspections, they may remove or step over the barriers, but they are not allowed to perform any other tasks. ( ) Incorrect
Error. In accordance with the requirements of the 2013 edition of the **Power Grid’s Power Safety Work Procedures**, the regulations for personnel who are allowed to inspect high-voltage electrical equipment alone are as follows: 1. When inspecting high-voltage equipment, those who have been approved by their respective units to do so alone shall not engage in any other tasks, nor shall they remove or step over the barriers in place ；
When the company authorizes personnel designated to inspect high-voltage electrical equipment to carry out such inspections, they may remove or step over the barriers, but they are not allowed to perform any other tasks. (Incorrect)
Error. When the company authorizes personnel designated to inspect high-voltage equipment to carry out such inspections, they are not permitted to engage in any other tasks, nor are they allowed to move away from or cross the barriers.
Error. In accordance with the requirements of the 2013 edition of the **Power Grid’s Electrical Safety Work Procedures**, the following rules apply to personnel who are allowed to inspect high-voltage electrical equipment alone. When such personnel inspect high-voltage equipment with the approval of their respective units, they are not permitted to carry out any other tasks, nor are they allowed to remove or step over the barriers in place ；