(Hydrogen production) Has the PSA temperature reached over 130 degrees? Hydrogen purity 99.8
Thread Content
The temperature of the three-phase water at the outlet is still in the 30s degrees, but after going through PSA and coming out of the adsorption tower, it reaches over 130 degrees? What exactly is causing it?
It is estimated that the adsorbent has been broken down
What are the other gases besides hydrogen?
Considering the issue with the thermometer, it can be measured using a temperature testing gun; PSA products without a heat source do not see an increase in temperature
I wonder if the remote transmission is working properly; just touch the PSA outlet pipeline to find out, right? 130 degrees Celsius – how hot is that?
The thermometer is not broken. The adsorption tower was replaced; the temperature dropped, but the hydrogen purity remained at 99.9%, and the adsorption time was only 160 seconds
The adsorption tower was replaced; the temperature dropped, but the hydrogen purity remained at 99.9%, and the adsorption time was only 160 seconds
The entire adsorption tower was replaced; the temperature dropped, but the hydrogen purity remains at 99.8% and cannot be increased. The adsorption time is only 160