Ammonia desulfurization
Thread Content
What is the reason for solid sulfur in the desulfurization tower, and what causes the high chloride ion content in the sulfuric acid AN solution?
It was carried in along with other substances; the performance of the catcher is average. High temperatures or too high a flow rate can also be problematic – it depends on the circumstances
Both of the situations you mentioned should exist
There are problems with the circulating water in the pump; there’s a leak in the pump, which allows the circulating water to enter the desulfurization system. Additionally, the flue gas also contributes to this issue. You should check to see how severe the corrosion at the outlet of your exhaust furnace is
Ammonia leakage is likely to occur, and the smell at the site is unbearable
It will definitely be high. About 5 ppm of chloride ions in the flue gas are absorbed ； Most is carried away by water containing 1% sulfuric acid ； According to the calculations, it has been concentrated by about 2,000 times ； So it will be between a thousand and ten thousand.