Find the height difference between the perimeter and the center of the tank bottom plate
Thread Content
Help: How to calculate the height difference between the bottom plate around the perimeter of an oil tank and the bottom plate at the center of the tank? I checked the basic design drawings of the oil tank, and it shows that the slope of the tank’s bottom plate is i=1.5%. How is the height between the central bottom plate and the bottom plates around the tank calculated? Thank you!
Find a storage and transportation designer to do the calculations
Your attached image was not uploaded successfully, so it cannot be viewed
The radius of the base plate, x1.5/100, is what the poster referred to as the height. For example, if the diameter of the tank bottom plate is 6120, this value corresponds to 45.9 mm.